 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TC7SET125F/FU TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC7SET125F,TC7SET125FU Bus Buffer Features TC7SET125F * * * * High speed ................................. tpd = 3.7 ns (typ.) at VCC = 5 V Low power dissipation .............. ICC = 2 A (max) at Ta = 25C Compatible with TTL outputs...VIL = 0.8 V (max.) VIH = 2.0 V (min.) 5.5V tolerant input. TC7SET125FU Weight SSOP5-P-0.95 : 0.016 g (typ.) SSOP5-P-0.65A : 0.006 g (typ.) Maximum Ratings (Ta = 25C) Characteristics Supply voltage range DC input voltage DC output voltage Input diode current Output diode current DC output current DC VCC/ground current Power dissipation Storage temperature Lead temperature (10 s) Symbol VCC VIN VOUT IIK IOK IOUT ICC PD Tstg TL Rating -0.5~7.0 -0.5~7.0 -0.5~VCC + 0.5 -20 20 25 50 200 -65~150 260 Unit V V V mA mA mA mA mW C C Marking Type name G B Pin Assignment (top view) G 1 5 VCC IN A 2 GND 3 4 OUT Y 1 2004-06-04 TC7SET125F/FU Logic Diagram G IN A EN OUT Y Truth Table G H L L A X L H Y Z L H Recommended Operating Conditions Characteristics Supply voltage Input voltage Output voltage Operating temperature Input rise and fall time Symbol VCC VIN VOUT Topr dt/dv Rating 4.5~5.5 0~5.5 0~Vcc -40~85 0~20 Unit V V V C ns/V DC Electrical Characteristics Ta = 25C Characteristics Symbol Test Condition VCC (V) 4.5~ 5.5 4.5~ 5.5 IOH = -50 A IOH = -8 mA IOL = 50 A IOL = 8 mA 4.5 4.5 4.5 4.5 5.5 0~ 5.5 5.5 5.5 Min 2.0 4.4 3.94 Typ. 4.5 0.0 Max 0.8 0.10 0.36 0.25 0.1 2.0 1.35 Ta = -40~85C Unit Min 2.0 4.4 3.80 Max 0.8 0.10 V 0.44 2.5 1.0 20.0 1.50 A A A mA V V High-level input voltage VIH VIL VIN = VIH or VIL VIN = VIH or VIL Low-level input voltage V High-level output voltage VOH Low-level output voltage 3-state output off-state current Input leakage current VOL IOZ IIN ICC VIN = VIH or VIL VOUT = VCC or GND VIN = 5.5 V or GND VIN = VCC or GND Per Input :VIN = 3.4 V :VCC or GND Quiescent supply current ICCT Other Input 2 2004-06-04 TC7SET125F/FU AC Characteristics (input: tr = tf = 3 ns) Characteristics Symbol Test Condition VCC (V) Propagation delay time tpLH tpHL tpZL tpZH 3-state output disable time Input capacitance Output capacitance Power dissipation capacitance tpLZ tpHZ CIN COUT CPD (Note) 4 6 15 10 pF pF pF 5.0 0.5 5.0 0.5 CL (pF) 15 50 5.0 0.5 15 50 50 Min Ta = 25C Typ. 3.7 6.0 3.6 6.0 7.3 Max 6.0 10.4 5.6 10.3 10.0 Ta = -40~85C Min 1.0 1.0 1.0 1.0 1.0 Max 6.9 11.9 6.5 11.9 11.5 ns ns ns Unit 3-state output enable time Note: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr) = CPDVCCfIN + ICC 3 2004-06-04 TC7SET125F/FU Package Dimensions Weight: 0.016 g (typ.) 4 2004-06-04 TC7SET125F/FU Package Dimensions Weight: 0.006 g (typ.) 5 2004-06-04 TC7SET125F/FU RESTRICTIONS ON PRODUCT USE * The information contained herein is subject to change without notice. 030619EBA * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * The products described in this document are subject to the foreign exchange and foreign trade laws. * TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law and regulations. 6 2004-06-04 |
Price & Availability of TC7SET125F
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |